Brickwork

Brickwork[Construction]

---

Name：Geometric Patterns from Tiles & Brickwork Catalog:Book Release:October, 1999 Manufacturer:Tarquin SalesRank:860730 Usually ships in 24 hours

Brickwork Brickwork is produced when a bricklayer uses bricks and Mortar (masonry)|mortar to build up structures such as walls, bridges and chimneys. (Brickwork is also used to finish openings such as doors or windows in buildings made of other materials.)Bricks are laid to expose their ends (Header bricks), or sides (Stretcher bricks). As the work progresses, the bricks are laid in rows called courses. The manner in which the bricks overlap as they are laid up is called the bond (masonry)|bond. Types of bond include Bond (masonry)#English bond|English, Bond (masonry)#Flemish Bond|Flemish, and Bond (masonry)#Herringbone bond|Herringbone, but the most common type of brickwork seen these days is the bond (masonry)#Stretcher bond|monotonous stretcher bond, showing only the long side-surface of the brick.Because only the outside of finished brickwork is visible, cheaper grades of brick are commonly used for the hidden parts of a wall. In an old red-brick house, behind the front of red, th! e rest of the walls are often made of softer yellow bricks. So with certain types of bond (e.g. garden wall bond) it is possible to use a higher ratio of cheaper bricks to more expensive bricks, making for a cheaper wall of the same dimensions. On the same house, sometimes a more economical "garden wall" bond has been used at the side and rear compared to the front.The thickness of brickwork is measured in units of brick. If you put some bricks down end-to-end with the long side facing you (stretchers) and then another row on top, the wall thickness is half a brick. There are rules of bonding, which have some exceptions. These specify the overlap between courses that is visible outside the wall, and also the overlap which must be made within the wall, for walls which are more than half a brick thick. Brickwork, like unreinforced concrete, has little tensile strength, and works by everything being kept in compression.Brickwork arches can span great distances, and carry consi! derable loads. quote Wikipedia - Article - History - License:GFDL

Construction　Renewal 2005.10.26　 Tie rod / Structural failure / Construction Specifications Institute / Gravity base structure / Glazing / Asphalt / Clunch / Ready-mix concrete / Rammed earth / Topping out / Abated / Glassphalt / Formwork / Guastavino tile / Reinforced concrete box / Building code / Gabion / Sod / Sewer / Straw-bale construction